Engineered Wood Flooring Size Guide

Engineered Wood Flooring Size Guide – If you are planning to install engineered hardwood flooring in your home and want to do it yourself, then there are lots of decisions that you need to make. Apart from choosing the best-engineered hardwood flooring, you also need to decide the color schemes, installation methods and above all the thickness and size of the materials. You need to decide whether you want to install the Engineered Hardwood flooring at grade, below grade or above grade. So, there are many crucial things that you need to take care of when installing Engineered Hardwood Flooring. Below you will come across a helpful guide for choosing the right size and thickness of the Engineered Hardwood for the flooring of your house.

Engineered Hardwood Flooring Dimension Advice!

You may be aware of the fact that there are different species of wood that go into designing Engineered Flooring. They all look different from each other and comprise different characteristics and thickness levels and hence it is important that you make the selection carefully. You need to choose the good quality Engineered Hardwood which can last for years to come with minimal maintenance. There is Engineered Hardwood for flooring that has 10mm to 20mm thickness levels and the thicker boards are the best option when you are not using any underlayment for the Engineered Hardwood.

Since they are thick in size, they are stronger and sound better underfoot. This also gives you the option to sand it down multiple times. But the only drawback associated with this is that it comes with a hefty price tag. But the durability and longevity of the thicker Engineered Hardwood boards outweigh the hefty price attached to it. But if you are using underlayment for the Engineered Hardwood Floors, then you may opt for the thinner boards.

As long as the width of the boards is concerned, you can choose between 90mm and 300mm widths. The width of the board matters a lot and it enhances the durability and strength of the single Engineered Hardwood panel. Before deciding the width of the Engineered Hardwood board you first need to consider the size of the room and also the effect that you want to achieve. The smaller plank width makes the room look larger and spacious and the larger width of the planks would look best for open areas of your house and it also offers a traditional look too.

Engineered Hardwood Flooring Thickness and Why It Matters a Lot!

When you are in the market and looking for Engineered Hardwood Flooring Sale, you will come across three common thickness levels of the Engineered Hardwood boards. This includes:

  • 7/8 inches or 22.23mm
  • 3/4 inches or 19mm
  • 5/8 inches or 15.8mm

Engineered Wood Flooring Size Guide – The most commonly preferred thickness levels of Engineered Hardwood planks are 19mm. Remember, the thicker the Engineered Hardwood plank, the more costly and high in durability and longevity it would be. In regards to Engineered Hardwood, there are two primary components that make up the thickness of the boards and this includes the core or base layer and the veneer. The Engineered Hardwood with thicker veneers usually lasts longer and offers higher durability.

In the market, you will come across Engineered Hardwood Floor Materials that come with a top veneer of 19mm and also some models have 26.16mm thickness which is just an inch thick higher than rare instances. Again, the entire choice depends on how long you are planning to stay in the home and whether or not you need to sand it or varnish the floor every 10 years or change the color and remove the wear scratches.

The standard Engineered Hardwood Floor comes with 3/4 inches of the solid wood ads core layer and has roughly 3/8 inches of wood prior to seeing the tongue of the plank. However, you can only do sanding of the plank three times before it wears out completely and if you are professional and know the right sanding method then you can extend the sanding up to 5 times before floor demands for replacement. You need at the minimum of 5mm of a wear layer of wood veneer to wear like 19mm of a solid floor. So, you are required to choose the right Wooden Flooring Size in mm before installing and ensure to do the sanding professionally to reap its benefits for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Quote

    This will close in 0 seconds